36″ X 14″ S Burner Hot Surface Electronic Ignition System - 36x14SSEI-S-120VAC-NG
Introducing Our Electronic Ignition Kits
Enhance your fire pit experience with our 36″ X 14″ S Burner Hot Surface Electronic Ignition System.
-
Start Up: This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
-
Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
-
Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.
Features:
- Fully Assembled- ready to install. Control components are protected within valve box.
- Start via wall switch, remote or whole house system; auto re-light if flame is lost.
- Ignition is complete using a robust and reliable Hot Surface igniter.
- On/Off models: Use with optional wall switch or Remote Control available.
- High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control included).
- 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
- 24vac Option: Typically used pool side or with other lower voltage requirements.
- Natural Gas or Liquid Propane: Factory built & tested for either fuel.
- Internal temperature monitoring with overheat auto shutoff.
- CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
- Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff.
Description
-
36X14SSEI-S / 36×14″ pan with S-Fire Burner / 75K
-
42X14SSEI-S / 42×14″ pan with S-Fire Burner / 85K
-
54X16SSEI-S / 54×16″ pan with S-Fire Burner / 110K
-
66X16SSEI-S / 66×16″ pan with S-Fire Burner / 135K
-
78X16SSEI-S / 78×16″ pan with S-Fire Burner / 165K
What Our Experts Think
-
36″ x 14″ rectangular S‑burner with hot surface electronic ignition for dependable, consistent flame start‑up.
-
Durable, professional‑grade construction for both residential and commercial fire pits.
-
Provides even flame distribution for rectangular fire features.
-
Designed for safety, efficiency, and long‑lasting outdoor performance.
-
Ideal for modern custom fire pit installations.
Q&A
-
Q: What fuel does it use?
A: Natural gas (NG) connection required.
-
Q: Is it compatible with rectangular fire pits?
A: Yes, engineered for 36″ x 14″ S‑burner setups; verify dimensions before installation.
-
Q: Is professional installation recommended?
A: Yes, for safe gas connection and optimal ignition performance.
Maintenance Tips
-
Inspect burner ports and gas connections regularly.
-
Keep the burner and pan free of debris.
-
Clean with mild soap and water; avoid harsh chemicals.
-
Protect from harsh weather when not in use.
-
Follow manufacturer guidelines for hot surface ignition system care
Damage 
Loss 
Theft 
